Onsite treatment, discharge or recycle of highly contaminated wastewater without need for third party disposal
Our Innovations
Benefits of WP&E Technologies and Solutions
WP&E Technology based systems are based on electrochemical and stripping technology that converts soluble and emulsified hydrocarbons and oils into insoluble hydrocarbons and insoluble oily phase that can be easily separated and recovered as byproduct. This does not necessitate the need to use acid, emulsion breaker, clarifiers, chemical oxidation, absorbent and adsorbent media to meet the low discharge specifications in ppm levels. The energy requirement is very low and operates at very low pressure differential of less than 5 psi. System has self cleaning capability controlled by PLC with low maintenance.
The technology has been installed successfully in produced water treatment, industrial wastewater treatment, Wastewater generated from decontamination during Plant Turnarounds, pipeline cleaning, wash water, process cooling water/ condensate decontamination, spent caustic wastewater etc.
- Emulsified oils โ petroleum based, non-petroleum and vegetable oil based
- WSO โ Water Soluble components of oils
- Tar and asphaltenes
- Naphthenic range organics and Polyaromatics
- BTEX and MTBE โ Benzene, Toluene, Ethylbenzene and Xylenes
- Chlorinated Organics โ VCM, EDC, Chloroform, PERC, TCE, DCE
- Phenolics, Gasoline Range and Diesel Range Organics (GRO, DRO)
- TOC/ COD
- Oil Coated Iron Sulfides
- Solids based colloidal emulsions
- Fluorinated, chlorinated, brominated and Iodine based compounds
- Ammonia, Hydrogen sulfide, Mercaptans etc
Influent Parameters | Feed | Outlet ( depending on specs) |
Oils | 100 โ 50,000 ppm | 0-10 ppm |
Benzene, Toluene, Ethyl, Benzene, Xylene Styrene, VCM, EDC and VOCโs | 100-5000 ppm | 0.01-0.16 ppm |
TOC/ COD | 1000- 50,000 ppm | 20-800 ppm |
TDS ( if needed as option to recycle) | 5,000-25,000 ppm | 100-2000 |
Ammonia ( free and dissolved) | 100-5,000 ppm | 1-100 ppm |
Sulfides and Mercaptans | 100-60,000 ppm | 0.05-1 ppm |
TSS Removal | 0.1-100 microns | 0.1-5 microns ( < 10 ppm) |
- Lower Overall Cost and Lower environmental impact than alternate options
- Onsite treatment and discharge of water per environmental regulations
- Saves millions of dollars compared to alternate and eliminates trucking or third party disposal
- Low energy needs
- Self Cleaning with low maintenance
- Available on rental or permanent units on skids and modular basis
- Can be implemented within a short time frame
- No acids or chemicals or oil removal filters or absorbent media
- Lower environmental footprint
- Recovered oil by product that can be re-used or recycled